After you complete your purchase, one of our experts will contact you to verify proper fitment.
The vehicle information you provided will be saved.
*All other brand lift kits are available.
OPTIONAL N3 LOADED STRUTS
• Includes pre-loaded coil
• Maintains smooth, factory-like ride
• Increased ground clearance
• Engineered for lifted applications
• Infinitely Variable Damping
• Leak-proof piston seal
• Massive 1 3/8in Bore
• Silver powder coat finish
OPTIONAL V2 MONOTUBE SHOCKS
• Monotube design
• Internal floating piston
• Nitrogen-charged
• 46mm high-flow piston
• Fast heat dissipation
• 36kN Tensile Strength
• Mounts inverted
• T6061 brushed aluminum body
YEARS | DRIVE | MAKE | MODEL |
2012-2018 | 4WD | Ram | 1500 |
2019-2023 | 4WD | Ram | 1500 Classic |
ITEM # | RCD118 |
MFG # | 31200, 31230, 31270, 31231, 31271, 31240 |
Height | 3" |
Est. Install Time | 5-6 hours |
Instructions |
Recommended Tires & Wheels | ||||
Tire | Wheel | Bolt Pattern | Offset | Note |
33x12.50R17 | Factory 17 | 5x5.5 | - | - |
33x12.50R17 | 17x8.5 | 5x5.5 | +0 | - |
33x12.50R17 | 17x8.5 | 5x5.5 | +1 | - |
33x12.50R17 | 17x9 | 5x5.5 | +0 | - |
33x12.50R17 | 17x9 | 5x5.5 | +1 | - |
33x12.50R17 | 17x9 | 5x5.5 | +18 | - |
33x12.50R17 | 17x9 | 5x5.5 | +20 | - |
33x12.50R18 | 18x8.5 | 5x5.5 | +0 | - |
33x12.50R18 | 18x8.5 | 5x5.5 | +1 | - |
33x12.50R18 | 18x9 | 5x5.5 | +0 | - |
33x12.50R18 | 18x9 | 5x5.5 | +1 | - |
33x12.50R18 | 18x9 | 5x5.5 | +18 | - |
33x12.50R18 | 18x9 | 5x5.5 | +20 | - |
33x12.50R20 | 20x9 | 5x5.5 | +0 | - |
33x12.50R20 | 20x9 | 5x5.5 | +1 | - |
305/55R20 | 20x9 | 5x5.5 | +1 | - |
285/55R20 | 20x9 | 5x5.5 | +1 | - |
33x12.50R20 | 20x9 | 5x5.5 | +18 | - |
305/55R20 | 20x9 | 5x5.5 | +18 | - |
285/55R20 | 20x9 | 5x5.5 | +18 | - |
33x12.50R20 | 20x9 | 5x5.5 | +20 | - |
285/55R20 | 20x10 | 5x5.5 | -19 | - |
⚠ Due to differences in manufacturing, dimension and inflated measurements, tire and wheel combinations should be test fit prior to installation.
PARTS |
(2) Upper control arms (2) Strut preload spacers (2) Strut spacers (2) Coil spacers Hardware (2) N3 loaded struts (2) M1 Monotube Struts |
Rough Country's 3-inch Bolt-On Kit offers easy installation and aggressive good looks at an incredible value. Take your truck to new heights with this excellent option for RAM 1500 pickups. This kit features a set of high-quality, forged aluminum Upper Control Arms designed to make alignment adjustments easier and Clevite rubber bushings for enhanced durability. These arms are designed to promote a factory-like geometry by keeping the ball joint at optimum angles after lifting. This design allows for an improved, greater range of motion from the ball joint, with less stress, wear and tear.
Rough Country’s 3-inch Bolt-On Kit features a set of durable front and rear spacers to provide lift height from front to rear. Once installed, this kit gives your truck plenty of ride height for up to 33in tires while offering a clean, level look from front to rear.
Local pickup welcome.
Some vehicles may require additional modifications or parts.
Guaranteed Fitment.
Questions Call us at (888) 814-1158