After you complete your purchase, one of our experts will contact you to verify proper fitment.
The vehicle information you provided will be saved.
*All other brand lift kits are available.
YEARS | DRIVE | MAKE | MODEL |
2019-2023 | 4WD | Ram | 1500 |
ITEM # | RCD129 |
MFG # | 34430A, 33830A, 34470, 33870 |
Height | 5" |
Est. Install Time | 7 - 8 hours |
Instructions |
Recommended Tires & Wheels | ||||
Tire | Wheel | Bolt Pattern | Offset | Note |
35x12.50R20 | 20x9 | 6x5.5 | +0 | |
35x12.50R20 | 20x9 | 6x5.5 | +1 | |
35x12.50R20 | 20x9 | 6x5.5 | +12 | |
35x12.50R20 | 20x10 | 6x5.5 | -25 | Minor Trimming |
35x12.50R20 | 20x10 | 6x5.5 | -24 | Minor Trimming |
35x12.50R20 | 20x10 | 6x5.5 | -19 | Minor Trimming |
35x12.50R20 | 20x10 | 6x5.5 | -18 | Minor Trimming |
35x12.50R22 | 22x9 | 6x5.5 | +0 | |
35x12.50R22 | 22x9 | 6x5.5 | +1 | |
35x12.50R22 | 22x9 | 6x5.5 | +12 | |
35x12.50R22 | 22x10 | 6x5.5 | -25 | Minor Trimming |
35x12.50R22 | 22x10 | 6x5.5 | -24 | Minor Trimming |
35x12.50R22 | 22x10 | 6x5.5 | -19 | Minor Trimming |
35x12.50R22 | 22x10 | 6x5.5 | -18 | Minor Trimming |
⚠ Due to differences in manufacturing, dimension and inflated measurements, tire and wheel combinations should be test fit prior to installation.
PARTS |
Lifted knuckles Strut spacers Front crossmember Differential drop brackets Driveshaft spacer Sway-bar links Skid plate Hardware Coil spacers Rear crossmember Track bar bracket Bump-stop extensions Brake line brackets Brake lines |
Transform your 5th generation RAM 1500 into an absolute BEAST with Rough Country’s 5in Suspension Lift Kit for Air-Ride Models. This all-inclusive kit comes with everything you need to give your truck an aggressive look and a formidable stance that complements the revamped design and upgraded look of this rugged vehicle.
Rough Country’s 5in Suspension Lift gives you plenty of increased ground clearance for off-road action and enough additional ride height to run up to 35in tires for a head-turning look that’s sure to command attention.
Each kit features a set of high-quality front and rear crossmembers with a laser-cut RC logo, giving the truck a fierce, but streamlined look after lifting. For true trailblazers, this kit also ships with a set of rear N3 Nitrogen-charged shock absorbers - valved specifically for a blend of on and off-road performance. This kit also includes an upgraded outer tie-rod that’s engineered to optimize turning and minimize bump steer while allowing you to fit a wider variety of wheels.
Local pickup welcome.
Some vehicles may require additional modifications or parts.
Guaranteed Fitment.
Questions Call us at (888) 814-1158